RCU Forums
0 2020/05/23 20:08:26
0 2020/05/23 20:08:23
Great place for FAA number
Great place for FAA number
0 2020/05/21 20:42:21
Sneak peek
Sneak peek
0 2020/05/21 20:42:15
0 2020/05/19 11:18:14
0 2020/05/15 22:09:11
0 2020/05/11 19:09:00
0 2020/05/11 16:06:55
Fuselage is all prepped and ready for some paint. 1,095 grams at this point.
Fuselage is all prepped and ready for some paint. 1,095 grams at this point.
0 2020/05/04 17:14:30
0 2020/05/04 16:04:14
0 2020/05/04 16:04:08
Upper wings and stabs.
Upper wings and stabs.
0 2020/05/03 17:09:48
Not only got all the Divergent parts primed but parts for a Reed Falcon and helicopter canopy as well.
Not only got all the Divergent parts primed but parts for a Reed Falcon and helicopter canopy as well.
0 2020/05/03 17:09:40
Tray trial fit in the fuselage.
Tray trial fit in the fuselage.
0 2020/05/02 16:30:46
The finished battery/ESC tray, 26 grams. Just 5 grams more then the excess wire removed from the ESC
The finished battery/ESC tray, 26 grams. Just 5 grams more then the excess wire removed from the ESC
0 2020/05/02 16:30:40
0 2020/05/01 05:43:06
0 2020/04/26 17:03:27
Once the motor mount dried, I bolted in the motor and installed the rear support.
Once the motor mount dried, I bolted in the motor and installed the rear support.
0 2020/04/25 18:52:51
Rear support was glued together as well.
Rear support was glued together as well.
0 2020/04/25 09:38:14
Glass saturated with epoxy resin and curing.
Glass saturated with epoxy resin and curing.
0 2020/04/25 09:38:07
After piping in a paste of epoxy and milled fiber on the outer edge of the mount, a layer of 3oz cloth was applied.
After piping in a paste of epoxy and milled fiber on the outer edge of the mount, a layer of 3oz cloth was applied.
0 2020/04/25 09:31:02
The first step was to tack glue the mount into the nose. For this I secure the mount to the motor and get it onto place using a spinner backplate to align the motor to match the nosering which has the correct thrust angles molded in.
The first step was to tack glue the mount into the nose. For this I secure the mount to the motor and get it onto place using a spinner backplate to align the motor to match the nosering which has the correct thrust angles molded in.
0 2020/04/25 09:30:57
Some paint and Vinyl, she looks brand new.
Some paint and Vinyl, she looks brand new.
0 2020/04/23 07:47:29
After repairs, several patch panels on the wings and tail. There was a good crease just behind the canopy on this side.
After repairs, several patch panels on the wings and tail. There was a good crease just behind the canopy on this side.
0 2020/04/23 07:47:25
0 2020/04/22 18:50:31
0 2020/04/22 18:50:20
0 2020/04/11 18:49:27
All packed up after a rewarding day.
All packed up after a rewarding day.
0 2020/04/11 18:17:11
Part of the fleet.
Part of the fleet.
0 2020/04/11 18:17:06
Russ's brand new Divergent with the Prototype looking it over.
Russ's brand new Divergent with the Prototype looking it over.
0 2020/04/11 18:16:33
Future pilot?
Future pilot?
0 2020/04/11 18:16:05
0 2020/04/10 20:23:32
0 2020/04/05 15:15:06
0 2020/04/05 11:16:57
0 2020/04/05 11:16:52
0 2020/04/05 11:16:45
0 2020/04/04 19:16:04
0 2020/04/04 19:15:10
0 2020/03/30 19:40:21
0 2020/03/30 19:40:14
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.